Author: Apo

  • 102 | Céramique : Introduction au tournage et tournassage

    102 | Céramique : Introduction au tournage et tournassage

    102 | CÉRAMIQUE : Introduction au tournage et tournassage

    IMPORTANT

    ATTENTION : il s’agit d’une session de formation donnée en deux séances, même jour et même heure à une semaine d’intervalle. La date du billet correspond au premier cours.

    Si aucune date annoncée ne vous convient, veuillez contacter le comité par courriel ceramique@lespacemaker.com afin d’évaluer de nouvelles options.

    The class is offered in French. If you would like to follow it in english email us at ceramique@lespacemaker.com and we will try to accommodate you.

    Session de deux cours, pour apprendre le tournage, tournassage et préparation à la cuisson

    Cette formation vous permettra de vous initier à la pratique du tournage en cours semi-privé (deux étudiants). L’atelier comprend la fabrication de deux à trois contenants tournés que vous pourrez récupérer après séchage et cuisson. La deuxième séance vous permettra de compléter vos pièces fabriquées à l’aide d’un tour – techniques de finition (pied du contenant), la pose d’anses, et les pré-requis pour avoir accès à la cuisson de vos pièces.

    Éléments théoriques :

    • Types et consistances de l’argile
    • Familiarisation au tour et à ses outils
    • Étapes de fabrication d’un contenant tourné en céramique
    • Consistance de l’argile
    • Séchage
    • Préparation à l’émaillage

    Éléments pratiques :

    • Faire un contenant tourné
    • Préparer puis nettoyer son espace de travail de manière optimale
    • Finition du pied
    • Fabrication et ajout d’anse

    Accès :

    Pour avoir un accès en autonomie à l’atelier céramique de LESPACEMAKER, il faut suivre 101 | CÉRAMIQUE : Initiation à la céramique ou la reconnaissance des acquis équivalente.

    Liste de matériel fourni avec l’inscription : Tout le matériel est fourni pour la formation.

    Niveau de la formation : Débutant

    Langue de la formation : Français

    Durée de la formation : deux séances de 3h (6h au total)

    Formatrice : Laure Masson

  • Tica’s Hiring

    We are pleased to announce that we have recently hired a new employee, Tica Mikol, to join our team. Tica will be in charge of community management at LESPACEMAKER, an essential role that aims to support the overall coordination of our activities, the coordination and programming of workshops, the management of ongoing communications to members and the LESPACEMAKER community as well as the implementation of new communications tools and protocols adapted to our organization. She will also work on the standardization of internal communications, the development of projects, participation in fundraising events, and the promotion of our organization.

    Tica is passionate and committed to the field of culture and new media. She brings a wealth of experience in project management, communications, and community engagement. We are confident that her expertise and drive will be invaluable in helping our community achieve its goals and continue to grow.

    In addition to her contribution to the practical coordination of the workshops, Tica will play an essential role in the collective life of our organization. She will support the committees, help integrate new members, and ensure every member feels welcome and included in our community.

    We are pleased to welcome Tica. We are confident that her contribution will benefit our organization and that her expertise and commitment will be essential assets in helping our community achieve its goals.

    We are counting on the community to welcome her warmly and hope for a positive response for Phase B because the office is getting small!

  • Movement in the Board of Directors (2023 AGM)

    Changes in the LESPACEMAKER Board of Directors

    The Annual General Meeting held on April 5th marked the end of the mandate of the 2022 Board of Directors. The Board would like to congratulate Camille Blais who was elected by the assembly. Her positive energy, her involvement and her sensitivity to the reality of women in the maker movement are assets that will be very valuable to the new board.

    Let’s also mention the re-elections of Érik Jenkevice and Alaric Bergeron who are undertaking a two-year mandate.

    The Board would like to acknowledge the end of the mandate of Richard Lussier who had been appointed for one year to fill a vacant seat. The Board would like to thank Richard for his involvement and hard work, particularly in the recognition of volunteer members, which culminated in the adoption of a change to our general by-laws that recognizes the undeniable contribution of volunteer members to the maintenance and growth of our beautiful project.

    In closing, the Board would like to thank Geneviève Thériault who has been an appointed member of the Board since the beginning of the project. Trained as a lawyer, Geneviève was the legal expert of the Board of Directors and her contribution to the different phases of the project’s development would be difficult to quantify… Let’s just say that her passion, her expertise, her dynamism and her great organizational intelligence were at the heart of all the phases of LESPACEMAKER’s creation and allowed the different Boards of Directors of which she was a member to confidently move forward on the legal side of sound management.

    Geneviève had made inclusion at LESPACEMAKER her main concern and although the Board of Directors has always had this issue at heart, Geneviève emphasized upon leaving that more concrete actions are needed to achieve our goals. Her last action on this matter was to raise our awareness of the work that remains to be done and the Board of Directors is getting down to work this week to give this issue the importance it deserves and find concrete ways to establish a healthy climate of respect and inclusion of diversity at LESPACEMAKER.

    Don’t forget that you can always communicate your ideas, dissatisfactions, suggestions, questions or complaints to the email address CA@lespacemaker.

  • Levée de fonds du comité cuir

    L’espace cuir a travaillé fort pour vous préparer des cadeaux à offrir pour les fêtes!

    Nous organisons une levée de fond pour l’achat d’une machine à coudre et nous vous proposons 2 items : un porte-cartes origami pouvant contenir jusqu’à 8 cartes (35$) et un porte-clés support de téléphone (15$) pour regarder des vidéos tutos tout en réalisant vos plus belles créations. Ils sont étampés avec le logo de LESPACEMAKER , disponibles en marron clair en cuir tanné végétal. Aidez nous à atteindre notre rêve!

    Pour soutenir la levée de fonds, vous pouvez écrire à cuir@lespacemaker.com pour faire une réservation ou passer en personne à LESPACEMAKER.

  • 101 | Initiation au dessin vectoriel

    101 | Initiation au dessin vectoriel

    Initiation au dessin vectoriel

    IMPORTANT

    Si aucune date annoncée ne vous convient, veuillez contacter le comité par courriel 3d@lespacemaker.com afin d’évaluer de nouvelles options.

    The class is offered in French. If you would like to follow it in english email us at 3d@lespacemaker.com and we will try to accommodate you.

    Utile pour créer des fichiers pour la découpe laser, la CNC ou en sérigraphie.

    Venez apprendre les bases du dessin Vectoriel sur le logiciel Inkscape. C’est une compétence nécessaire pour l’utilisation de machines à contrôle numérique telles que la CNC et la découpe laser et pour créer des images pour la sérigraphie. Si vous n’avez jamais touché à un logiciel de dessin vectoriel, cette formation de va vous apprendre les bases pour commencer à exprimer votre créativité!

    * Si vous le souhaitez, arrivez avec votre concept (image numérique ou dessin) que vous voudriez tracer en vectoriel. *

    Éléments théoriques:

    • Qu’est-ce qu’un dessin vectoriel
    • Différents formats vectoriels
    • Différents Logiciels vectoriels

    Éléments pratiques:

    • Créer un document dans Inkscape
    • Dessiner formes de base
    • Convertir texte en vecteur
    • Convertir image en vecteur
    • Layers, guides, couleurs pour rester organisé
    • Exporter le document

    Après la formation, le participant sera habilité à :

    • Utiliser le logiciel inkscape pour créer des fichiers vectoriels, utiles pour utiliser la découpe laser et/ou créer des acétates pour la sérigraphie.

    Liste de matériel fourni avec l’inscription:

    Tout le matériel est fourni pour la formation – mais vous pouvez venir avec votre propre ordinateur portable si vous préférez.

    Logiciel à télécharger: https://inkscape.org/release/inkscape-1.1.1/

    Niveau de formation : Débutant

    Préalable : Aucun prérequis

    Nombre de participants : 4 personnes

    **La formation pourrait être annulée si un minimum de 2 participants n’est pas atteint 24 heures avant la date du cours **

    Durée de la formation : 2h

  • MARCHÉ LIBRE COURS

    Marché Libre Cours is our annual market of artists, artisans and other merchants from Montreal and the surrounding area. You’ll come across woodworkers, ceramists, jewellers, illustrators, screen printers, seamstresses, blacksmiths, welders, farmers, herbalists, tattoo artists, Tarot readers and much more… A huge fair of eclectic, creative and passionate people working together to present their creations to you in a festive neighbourhood party atmosphere. reminiscent of a block party.

    WHEN : About the first weekend of October

    WHERE : In our courtyard, at 2875 Hochelaga street in Montreal

  • Hiring of Morgane

    LESPACEMAKER is pleased to announce the hiring of Morgane Saint-Cyr as Logistics and Operations Manager. His tasks will be to support the general management in collaboration with the assistant management in the execution of tasks related to the practical operations of the organization, as well as to ensure the good order of the workshops and the implementation of related projects such as the Discount and recovery. Morgane will also ensure communication to the LESPACEMAKER community.

    Morgane holds a bachelor’s degree in Human Ecology from the College of the Atlantic in Bar Harbor, Maine and has evolved in a multitude of organizations during his studies. His poise and organizational intelligence make him a prime candidate for the position.

    It goes without saying that LESPACEMAKER is in the process of redefining its structure by setting up a management team that will be able to divide up the tasks and meet the challenges according to the skills of the resources in place. With Arno as general manager, Marie-Jade in finance and Morgane in operational logistics, our project has a strong team that will be able to effectively manage the day-to-day work of the workshop and ensure the project growth.

    We are counting on everyone’s collaboration to ensure his integration into the project.

  • Embauche de Morgane

    LESPACEMAKER est heureuse d’annoncer l’embauche de Morgane Saint-Cyr à titre de Responsable de la logistique et des opérations. Il aura comme tâches de supporter la direction générale en collaboration avec la direction adjointe à l’exécution des tâches liées aux opérations pratiques de l’organisation, ainsi que de veiller au bon ordre des ateliers et à la mise en place des projets connexe comme la Remise et le récupératum.

    Morgane assurera également la communication à la communauté de LESPACEMAKER.

    Morgane est titulaire d’un baccalauréat en Écologie humaine du College of the Athlantic de Bar Harbor au Maine et a évolué dans une multitude d’organismes au cours de ses études. Son aplomb et son intelligence organisationnelle en font un candidat de choix pour le poste.

    Il va sans dire que LESPACEMAKER est en train de redéfinir sa structure en mettant en place une équipe de direction qui pourra diviser les tâches et relever les défis selon les compétences des ressources en place. Avec Arno à la direction générale, Marie-Jade aux finances et Morgane à la logistique opérationnelle, notre projet s’est doté d’une équipe de feu qui pourra gérer efficacement le quotidien de l’atelier et assurer la croissance du projet.

    Nous comptons sur la collaboration de tout le monde pour assurer son intégration au projet.

  • 102 | ÉLECTRONIQUE : Programmation de micro-contrôleurs Arduino

    102 | ÉLECTRONIQUE : Programmation de micro-contrôleurs Arduino

    102 | ÉLECTRONIQUE : Programmation de micro-contrôleurs Arduino

    IMPORTANT

    Si aucune date annoncée ne vous convient, veuillez contacter le comité par courriel electronique@lespacemaker.com afin d’évaluer de nouvelles options.

    The class is offered in French. If you would like to follow it in english email us at electronique@lespacemaker.com and we will try to accommodate you.

    Les participants sont encouragés à venir avec leur propre PC si possible. Nous les aiderons à installer les logiciels nécessaires. Si ce n’est pas possible, les participants pourront utiliser le PC de l’atelier électronique.

    Cette formation fait suite au 101 électronique et présente les bases de la programmation de micro-contrôleurs de type Arduino.

    Côté matériel, nous aborderons:

    • différents types de capteurs et actuateurs
    • quelques conseils pour réaliser une carte complète (breadboard vs. soudure)
    • comment utiliser un oscilloscope et un analyseur logique pour décoder un protocole

    Côté logiciel, nous couvrirons les points suivants:

    • comment développer un programme simple
    • comment configurer l´’environnement Arduino pour en faire un outil plus professionnel
    • comment déboguer un programme

    Le JTAG sera volontairement écarté de cette formation car il n’est pas disponible par défaut dans l’environnement Arduino. Cependant si certains participants sont intéressés nous pourrons faire une démonstration sur un micro-contrôleur ATMega.

    Éléments théoriques:

    • Les bases de la programmation en C/C++
    • Structure d´’un programme Arduino
    • Explorer les exemples de code fournis dans l´’environnement Arduino
    • Utiliser une librairie externe pour faire fonctionner un capteur ou un actuateur

    Après la formation, le participant sera habilité à :

    • Réaliser une tâche simple: faire clignoter une LED
    • Communiquer par UART/I2C/SPI (sur USB et entre 2 appareils)
    • Déboguer une communication numérique
    • Déclencher un actuateur lorsqu’un capteur renvoie un événement.

    Liste de matériel fourni avec l’inscription :

    • Tout le matériel est fourni pour la formation

    Niveau de formation : Intermédiaire

    Formation(s) préalable(s) :

    101 | ELECTRONIQUE : Soudage d’un kit + intro à l’atelier OU de l’expérience avec la soudure standard

    Langue de la formation : Français

    Durée de la formation : 3h

  • 101 RAC | ELECTRONIQUE : Intro à l’atelier + Reconnaissance des Acquis

    101 RAC | ELECTRONIQUE : Intro à l’atelier + Reconnaissance des Acquis

    101 RAC | ELECTRONIQUE : Intro à l’atelier + Reconnaissance des Acquis

    IMPORTANT

    Si aucune date annoncée ne vous convient, veuillez contacter le comité par courriel electronique@lespacemaker.com afin d’évaluer de nouvelles options.

    The class is offered in French. If you would like to follow it in english email us at electronique@lespacemaker.com and we will try to accommodate you.

    Ce cours est destiné aux initiés et aux professionnels. Cette formation se veut principalement une reconnaissance des acquis obligatoires pour l’utilisation de certains outils et de la machinerie ainsi qu’aux spécificités et règles de l’Atelier Electronique de LESPACEMAKER.

    Éléments théoriques:

    • Philosophie de l’atelier Électronique
    • Équipements disponibles
    • Consommables
    • Sécurité
    • Ménage

    Après la formation, le participant sera habilité à :

    • Accès à l’espace Atelier Électronique (avec carte de membre active de LESPACEMAKER)

    Liste de matériel fourni avec l’inscription :

    • Tout le matériel est fourni pour la formation

    Niveau de formation : Initié.e.s

    Formation(s) préalable(s) : De l’expérience avec les principes de base de l’électronique et de soudage

    Langue de la formation : Français

    Durée de la formation : 1h

    Fabrice

    Comité électronique

    [Description à suivre]